Capacitive measuring system IP68 for industrial applications
no recalibration
The capaNCDT DT61x0/IP is an industrial-grade, capacitive sensor system for displacement, distance and position measurements. Consisting of a sensor, a sensor cable and a controller, the measuring system is ready for use without any on-site calibration. Due to its very good temperature stability, immunity to magnetic fields and robust design that is protected to IP68, the capaNCDT DT61x0/IP is used for industrial measurement tasks such as air gap measurement in generators and regulation of plant and machinery.
- Measuring ranges (mm):
0.5 | 1 | 1.25 | 2 | 3 | 4 | 6 - Linearity max. 1 µm
- Resolution max. 0.05 µm
- Voltage output
- Digital RS485 interface (DT6120/IP)
- Dust-proof and watertight aluminum die-cast housing (IP68)
- Robust and temperature-resistant sensor cable
- Wide range of sensors (gap sensor/board design/cylindrical sensor/thread sensor)
Protected to IP68, the DT6110/IP capacitive controller is designed for measurement tasks in industrial environments. The DT6110/IP controller is available with either a voltage or current output, and can also be used in confined spaces due to its compact design.
- Resolution dynamic 0.02 % FSO (1 kHz)
- Frequency response 1 kHz (-3 dB)
- Output 0...10 V (short circuit proof)
Classified to IP68, the DT6120/IP capacitive controller is designed for measurement tasks in industrial applications. In addition to either a voltage or current output, the DT6120/IP controller offers an RS485 interface. Due to its compact design, the controller can also be used in confined spaces.
- Resolution dynamic 0.2 % FSO (1 kHz)
- Frequency response 1 kHz (-3 dB)
- Output 0...10 V (short circuit proof)
- Digital interface RS485
